GARMIN LiveScope Plus LVS34 Dedicated 0° Angle Motor Housing

Please note that this item is also sold on Yahoo Flea Market, so we apologize if it is sold out.

Garmin LiveScope Plus LVS34 0° Angle Mount.
This product is designed exclusively for motor housing mounting, not for shaft mounting.

The LiveScope Plus LVS34 comes standard with an 8° angled mount for the trolling motor shaft.
While this angle is designed to avoid interference with the motor, it results in an 8° deviation from the intended direction when mounted.
This deviation is negligible in close-range or shallow water, but it significantly affects accuracy and reduces precision when targeting deeper water or longer distances.

A 0° mount is ideal for achieving an accurate beam angle.
However, with shaft-mounted types, interference with the motor housing may occur depending on the environment.

Therefore, this product is designed for direct attachment to the motor housing without obstructions, allowing you to aim the beam in the correct direction while avoiding interference.

- This product uses 30% glass fiber reinforced high-strength nylon resin (PA66-GF30).
By mixing 30% glass fiber with nylon as a base, we achieve strength and rigidity comparable to metal while remaining lightweight.

① High-strength nylon + glass fiber reduces the risk of breakage or cracking.
② Unlike metal, it is resistant to deformation or paint peeling even if dropped.
③ It is also resistant to abrasion and UV rays, allowing for long-term use across seasons.

Main Physical Properties (Typical Values)
Density: 1350 kg/m³
Molding Shrinkage (Flow Direction): 0.3%
Tensile Modulus: 9800 MPa
Tensile Strength: 185 MPa
Flexural Modulus: 9200 MPa
Heat Deflection Temperature (1.8 MPa): 207°C
Melting Point: 220°C
Volume Resistivity: 10 Ωm
Water Absorption: 3.1%