Hand Riveter with 40 Rivets, 4 Sizes, 4 Nose Pieces, and Wrench

This is a hand-type riveter for blind riveting.
It supports four sizes: 2.4/3.2/4.0/4.8mm, and rivets are included, so you can use it right away.
*Please note that its purpose is different from a hand nutter (a tool for press-fitting nuts).

[Set Contents]
- Hand Riveter Main Unit x 1
- Nose Pieces (φ2.4/φ3.2/φ4.0/φ4.8) x 1 each
- Rivets (φ2.4/φ3.2/φ4.0/φ4.8) x 10 each (40 total)
- Nose Piece Replacement Wrench x 1

[Main Unit Specifications]
- Total Length: 235mm
- Weight: 420g

[Rivet Specifications (Approximate)]
- Applicable Plate Thickness: 1-4mm (varies depending on material, hardness, etc.)
- Recommended Pilot Hole Size
  2.4mm → 2.5mm / 3.2mm → 3.3mm / 4.0mm → 4.1mm / 4.8mm → 4.9mm
*Rivets made of hard materials (e.g., stainless steel) are not recommended as they may cause caulking failure or excessive tool load.

[Easy to Use]
1) Attach the nose piece that matches the size.
2) Insert the rivet.
3) Place it in the pilot hole and squeeze the handle (the shaft will break off to complete).
4) Remove the broken shaft from the jaw case (to prevent jamming).