Honda 2 HP Outboard Motor Stabilizer - No Drilling Required - For BF2D & BF2DH

New Improved Model
HONDA 2 HP Outboard Motor Stabilizer
Compatible with BF2D & BF2DH

Compatible with Old Type (BZBF)
Compatible with Current Type (BAAC)

Due to bending and dimensional changes, top speed has slightly increased depending on wind direction and current conditions.
When the throttle is fully open, try adjusting the tilt so that the outboard motor is tilted back about 2-3° from vertical to the water surface.

[Effects of the Stabilizer]
Planing is a state of navigation where a much larger lift force than buoyancy acts to support the object.
The hull is lifted by the lift force acting on the bottom of the boat, and when planing, the bow lowers, and it is characterized by running as if gliding on the water surface with a trim angle (longitudinal inclination) of 3° to 5° relative to the water.
Therefore, the stabilizer also generates lift on its underside at a trim angle of 3° to 5°.
This lifts the outboard motor and brings it into a planing state more quickly.
This product is designed with unique bending to ensure flow velocity and prevent the planing effect from decreasing.
Please experience the effect of this stabilizer.

Material: SUS304 (Stainless Steel) 2B material, 2.0mm thickness
Laser cut and bent

Resistant to saltwater corrosion (rust) and excellent strength due to bending.

Protects the propeller even when the outboard motor is placed horizontally.

Significantly reduces water splash from the propeller onto the lower part of the outboard motor.
(Reduces seawater spray onto the engine.)

Processing the outboard motor (drilling holes) can cause the paint on the outboard motor body to peel and lead to corrosion, but this product can be installed without any processing, so there is no need to worry about corrosion.

(The left side is attached by sandwiching the anode metal together with the stabilizer, and the right side is attached by sandwiching the body with the included plate. *See image)
Plate and mounting bolts are included (stainless steel).

This is our original product.

Note) There may be scratches, oil stains, burn marks, dross adhesion, burrs, etc. from the manufacturing process.

Please judge from the images.

★Important Notes★
Please refrain from purchasing if you are sensitive or concerned about minor details.

No warranty is provided.

We strive for same-day service, but depending on work circumstances, same-day shipping may not be possible.

We are not responsible for any issues under any circumstances.

We await your purchase only if you understand the above.